Double-sided crisscross tooth
Product Description
The double-sided pitch synchronous belt and tooth profile equivalent to a single tooth and tooth belt pitch.
Double teeth with tooth by the synchronous belt arrangement standards can be divided into two types;
DA-duplex synchronous belt tooth, a tooth with its two symmetrical arrangement, see Figure (a)
DB-duplex synchronous belt gear, with its two locations with staggered teeth were, see Figure (b) 
|
Type |
W |
T |
Size |
Pitch Length (mm) |
Teeth No. |
|
D-MXL |
0.508 |
1.53 |
|
|
|
|
D-XL |
0.508 |
3.05 |
196XL-1970XL |
497.84－5003.8 |
98－985 |
|
D-L |
0.762 |
4.58 |
203L－1988L |
514.35－5048.25 |
54－530 |
|
D-H |
1.372 |
5.95 |
670H－2500H |
1701.8－6350 |
124－500 |
|
D-XH |
2.794 |
15.49 |
700XH－2275XH |
1778.00－5778.5 |
80－260 |
|
D-XXH |
3.048 |
22.11 |
700XXH－2625XXH |
1778.00－6667.5 |
56－210 |
|
D-T2.5 |
0.60 |
2.00 |
T2.5x500－T2.5x5000 |
500.00－5000.00 |
200－2000 |
|
D-T5 |
1.00 |
3.40 |
T5x500－T5x7000 |
500.00－7000.00 |
100－1400 |
|
D-T10 |
2.00 |
7.00 |
T10x500－T10x7050 |
500.00－7050.00 |
50－705 |
|
D-T20 |
3.00 |
13.00 |
T20x1700－T20x7000 |
1700.00－7000.00 |
85－350 |
|
D-AT10 |
2.00 |
7.00 |
AT10x500－AT10x7000 |
500.00－7000.00 |
50－700 |
|
HTD.DA-3M |
0.760 |
3.10 |
501-3M－5010-3M |
501.00－5010.00 |
167－1670 |
|
HTD.DA-5M |
1.143 |
5.26 |
500-5M－7000-5M |
500.00－7000.00 |
50－1400 |
|
HTD.DA-8M |
1.372 |
8.17 |
512-8M－6880-8M |
512－6880 |
64－860 |
|
HTD.DA-14M |
2.80 |
14.84 |
1750-14M－6860-14M |
1750－6860 |
125－490 |
|
HTD.DA-S8M |
1.372 |
7.48 |
S8M-512－S8M-6880 |
512－6880 |
64－860 |
